eco-CONTROL EC200-K Micro Dispenser Controller

Operating Principle

The control units are microprocessor-controlled and are simple to operate with a user friendly graphic interface and clear keyboard layout. The pre-set supply pressure can be monitored and digitally displayed in either Bar or PSI.

Dispense rate and motor current are monitored on the display. Output signals can be connected via I/O ports to a PLC for full integration into automated lines. A multitude of volumetric dosing programmes can be saved onto the memory card for easy program selection & switching.

 

 eco-CONTROL EC200-K Control Unit

 

Technical Features
Back panel of the eco-CONTROL EC200-K Quantity Dispense Program
Start / Stop Program
Timed Dispense Program
Teach IN function (External and NAVI)
Easy Calibration
Set Volume Readout in g or ml
Dosing Flow Readout in ml/min and g/min
Empty Signal for Supply Vessel (Internal or External)
Storage of Dosing Programs with Part Numbers
Set Pressure / Actual Pressure Reading in bar/psi
Digital Clock

 
It is possible to control two eco-PEN Precision Volume Dispensing Units with an Additional Card.

 

Control panel eco-CONTROL EC200-K
 
   

Typical setup for self-levelling
low-viscosity fluids

 

Typical setup for medium to high-viscosity fluids & pastes

Technical Data

Dimension (H x W x D): 100 x 240 x 260 mm
Weight: Approx. 1.3 kg
Voltage: 24 V DC, Power Adapter Supplied
Voltage Power Adapter: 230 V / 50 / 60 Hz
Power Output: 100 VA / 2.7 A
Start: Key, Foot-Switch
Start/Stop External: 24 V Impulse High/Low Terminal Block; Low 0 to 1.5 mV, High 12 to 24 V
Inputs: 1-3 Filling Level, Supply Pressure, Foot-Switch plug
Inputs: 4-5 free
Output: 1 Filling Level Alarm, Optocoupler, Terminal Block; max. 30 V, max 10mA
Output: 2 Ready to Operate, Optocoupler, Terminal Block; max. 30 V, max 10mA
Output: 3 Error, Optocoupler, Terminal Block; max. 30 V, max 10mA
Outputs: 4-5 Optocoupler, Terminal Block; max. 30 V, max 10mA
Connection: -GND External Components
ON/OFF Switch Yes
Interface: RS232
Compressed Air: 0 to 7 bar (0 to 100 psi)
External Memory: MM C/SD-Card min 64 MB max. 20 Dosing Programs Readable with Microsoft Operating Systems
Operating Conditions: +10°C to +40°C (Ta.), Air Pressure 1 bar
Temperature of Medium: +10°C to +40°C
Storage Conditions: Dry & Dust Free -10 to +40°C
CE Certification: Yes
 
 Download Product Sheet
 for EC200-K Controller		  Download Instruction Manual
 for EC200-K Controller
 

Other PreeFlow® Products

   eco-PEN Micro Dispensers

   eco-CONTROL Dispenser Controllers

   Dispenser Accessories