|
|
Servo-Flo™ 105 - Variable Ratio,
Dual Servo Drive
|
 |
This
variable-ratio, positive rod displacement, meter-mix
dispense system has dual independent-drive servo motors
to accurately meter materials on ratio. Ratio is adjusted in the
operator interface.
The system dispenses precision volumetric shots or bead
profiles. The flow rate can be varied on-ratio during the
dispense cycle to accommodate different shot flows, bead
diameters and tip speeds.
The meter accepts low to high viscosity materials and can be
supply pump fed or pressure tank fed. The meter and control
panel are individually floor stand mounted or on a common
portable cart.
|
|
|
 |
Click
here for further information on the Servo-Flo 105 Floor Mount |
|
|
|
Click
here for further information on the Servo-Flo 105 Robot Mount |
|
Top of
Page
|
Servo-Flo™ 605 -
Variable Ratio, Dual Servo Drive
|
|
 |
This
variable-ratio, positive rod displacement, 2 Component
meter-mix dispense system uses dual independent-drive
servo motors to accurately meter materials on ratio. The meter,
control panel and operator interface are enclosed. The ratio is
adjusted in the operator interface control panel.
The system dispenses shots or beads and the dispense speed can
be varied throughout the dispense cycle to provide a variable
flow rate. The meter system is designed for low to high
viscosity materials, can be fed by pump or tanks and dispenses
precision shot volumes or bead profiles.
|
|
|
|
Click
here for further information on the Servo-Flo 605 |
|
Top of
Page
|
|
Servo-Flo™ 608 - Variable Ratio, Dual Servo Drive
|
|
 |
This
variable-ratio, positive rod displacement, meter-mix
dispense system has dual independent-drive servo motors
to adjust or select various material ratios. The positive rod
displacement meter dispenses on both the up and down stroke
which eliminates the meter reload cycle.
The system dispenses precision volumetric shots or bead
profiles. The flow rate can be varied on-ratio during the
dispense cycle to accommodate different flow rates, bead
diameters and tip speeds.
The meter accepts low to high viscosity materials and can be
supply pump or pressure tank fed. The meter and control panel
are individually floor mounted or combined on a portable cart
with the supply.
|
|
|
|
Click
here for further information on the Servo-Flo 608 |
|
Top of
Page
|
|
Servo-Flo™ 302 Fixed Ratio, Servo Drive
|
|
 |
Totally enclosed and designed for automated production, the
Servo-Flo 302 is a Servo-motor powered fixed
ratio, positive rod displacement 2 part meter mix
dispense system.
This unit can be tank fed or pump fed and is capable of
dispensing precise volumes or precision bead profiles.
The dispense rate can be varied throughout the dispensing
process to provide varying bead sizes or variable flow. Ideal
for low to medium viscosity materials.
|
|
|
|
Click
here for further information on the Servo-Flo 302 |
|
Top of
Page
|
|
Servo-Flo™ 505 Fixed Ratio, Servo Drive
|
|
 |
Meter mix dispense and robotically apply
uniform beads of two component structural bonding materials
directly to metal and plastic automotive panels (i.e. doors,
hoods, decks).
A
servo motor with internal reduction drive and positive
displacement pistons are interfaced with the robot controller to
dispense the specific bead diameter throughout the adhesive
pattern.
A
light weight Snuf-Bak two component dispense
valve with disposable No-Flush static mixer
nozzle blends the materials at the point of application.
|
|
|
|
Click
here for further information on the Servo-Flo 505 |
|
Top of
Page
|
|
Program-A-Bead® 692 -
Fixed Ratio, Servo Drive
|
|
 |
Meter mix dispense
and robotically apply uniform beads of two component structural
bonding materials directly to metal and plastic automotive
panels (i.e. doors, hoods, decks).
A
servo motor drive with external reduction and positive
displacement pistons are interfaced with the robot controller to
dispense the specific bead diameter throughout the adhesive
pattern.
A
light weight Snuf-Bak two component dispense
valve with disposable No-Flush static mixer
nozzle blends the materials at the point of application.
|
|
|
|
Click
here for further information on the Program-A-Bead 692 |
|
Top of
Page
|
|
See-Flo®
494 - Fixed Ratio, Air-Oil Drive
|
|
 |
This
production proven meter mix dispense system is
well suited for applying uniform beads of two component
structural bonding adhesives.
AirDraulic™
driven (air over oil) positive displacement metering
rods meter the adhesive in exact proportions and dispense at a
preset constant flow rate. Meter systems are either floor or
cart mounted.
See-Flo 494 has a
volume capacity of 9.4 cu. in. at 1:1 ratio. The meter can be
supply pump fed or pressure tank fed. The meter and control
panel are on a common floor stand or portable cart.
|
|
|
|
Click
here for further information on the See-Flo 494 Floor Mounted |
|
|
|
Click
here for further information on the See-Flo 494 Cart Mounted |
|
Top of
Page
|
|
Servo-Flo™ 488 - Fixed Ratio, Servo Drive
|
|
 |
Servo-Flo 488 has
a volume capacity of 85.5 cu. in. at a 1:1 ratio. This
positive rod displacement meter-mix dispense system
applies a precise bead or shot of medium to high viscosity
materials.
The Servo Motor drive provides precise flow rates and dispense
volumes and is either floor or cart mounted.
The meter can be supply pump fed or pressure tank fed.
The meter and control panel are on a common floor stand or
portable cart and supplied with Snuf-Bak or No-Drip dispense
valves. |
|
|
|
Click
here for further information on the Servo-Flo 488 |
|
Top of
Page
|
|
See-Flo®
488 - Fixed Ratio, Air-Oil Drive
|
|
 |
This
positive rod displacement meter-mix dispense system
applies a precise bead or shot of medium to high viscosity
materials.
The AirDraulic™ air-over-oil drive provides
consistent flow rates and is either floor or cart mounted.
See-Flo 488 has a volume capacity of 85.5 cu.
in. at a 1:1 ratio. The meter can be supply pump fed or pressure
tank fed. The meter and control panel are on a common floor
stand or portable cart and supplied with Snuf-Bak or No-Drip
dispense valves.
|
|
|
|
Click
here for further information on the See-Flo 488 |
|
Top of
Page
|
|
See-Flo®
690 - Fixed Ratio, Air-Oil or Pneumatic Drive
|
|
 |
When a meter mix dispense application calls for applying precise
beads or shots of difficult to handle abrasive or high
viscosity materials, the See-Flo 690 is the
machine of choice.
Features include carbide valving and hardened piston rods that
never touch (scrub) the cylinder walls. It is powered by a
pneumatic or AirDraulic cylinder for precise shot or flow
control throughout the dispense cycle.
Low cost, disposable No-Flush mixer nozzles and
Snuf-Bak dispense valves can be remote mounted
for automated operations. May be pump or tank fed.
|
|
|
|
Click
here for further information on the See-Flo 690 |
|
Top of
Page
|
|
See-Flo®
387 - Fixed Ratio, Air-Oil Drive
|
|
 |
Rugged and simple to operate, this machine is a bench
top, air powered meter mix dispense system for applying
precise measured 'shots' of two component low viscosity
materials.
The See-Flo 387 is ideal for production
potting, encapsulating, bonding, or lab type applications.
The AirDraulic™ drive delivers a smooth, pulse free mixed
material flow rate.
The volumetric shot size is controlled by the stroke length of
the positive displacement metering pistons.
Its mechanical hard-stop ensures extremely accurate shot size
repeatability.
|
|
|
|
Click
here for further information on the SeeFlo 387 |
|
|
|
Click
here for further information on the See-Flo Applications |
|
Top of
Page
|
|
Servo-Flo™ 801 - Fixed Ratio, Servo Drive
Servo-Flo™ 801-HV - Fixed Ratio, Servo Drive
|
|
 |
The
Servo-Flo 801 and 801-HV
meters use a Servo-Motor to accurately dispense small
micro-shots of 2 component materials. This
compact design incorporates the positive displacement metering
and static mixing into one assembly for mounting at the point of
application. The mix-dispense valve may be meter or remote
mounted.
The
lightweight meter construction, carbide valves and remote
PLC control is ideal for robotic
and XYZ motion dispensing systems.
Servo-Flo 801
range is 0.02 - 7.2cc at 1:1 ratio.
Servo-Flo 801-HV
range is 0.02 - 18cc at 1:1 ratio.
|
|
|
|
Click
here for further information on the Servo-Flo 801 |
|
|
|
Click
here for further information on the Servo-Flo 801-HV |
|
Top of
Page
|
|
See-Flo®
202 - Fixed Ratio, Air-Oil Drive
|
|
 |
The
See-Flo 202 uses an Air-Draulic™ (Air-Oil) drive
to apply small micro-shots (0.02 cc and larger) of
2-component materials.
This compact design incorporates the positive displacement
metering and static mixing into one assembly for mounting at the
point of application.
The lightweight meter construction, carbide valves and remote
PLC control is ideal for manual and
semi-automatic applications.
|
|
|
|
Click
here for further information on the See-Flo 202 |
|
|
|
Click
here for further information on the See-Flo 202 Cart Mounted |
|
Top of
Page
|
|
See-Flo™ 391 - Fixed ratio, Pneumatic drive
|
|
 |
The
See-Flo 391 uses an all-pneumatic
drive to apply small micro-shots (0.02 cc and larger) of
2-component materials.
This compact design incorporates the positive displacement
metering and static mixing into one assembly for mounting at the
point of application.
The lightweight meter construction, carbide valves and remote
PLC control is ideal for manual and
semi-automatic dispensing systems.
|
|
|
|
Click
here for further information on the See-Flo 391 |
|
Top of
Page
|
|
|
"When it comes to solving
liquid dispensing problems, you won't find
a better resource than Sealant Equipment and Engineering." |
|
|
|
 |
